AREAS OF USE
Applicable to old and new wooden, metal and mineral interior and exterior surfaces. It can be applied over the synthetic paint.
SPECIFICATION
• Odorless as it is thinned with water and does not contain solvent.
• Harmless to human health and environment.
• Resistant to Ultra-violet rays and heat. No cracking and no fading within time.
• Easily dries due to its water based nature. The second coat application may be accomplished 3-5 hours.
• Constant shininess.
• Water-proof, can be wiped and knead.
• Excellent covering capacity.
• Applicable to all kinds of wooden, metal and mineral surfaces in and outside.
• Enables respiration in the buildings due to moisture and vapor absorbent character which is higher than the other alkyd based paints.
• More economic due to use of water in cleaning of the side equipment (roller, brush etc.)
• Applicable over the synthetic (oil) paint provided that it is performed in compliance with the given conditions.
APPLICATION
The surfaces subject to Bianca Vals Lux application must be clear from all kinds of oil, dust and blister remainders should be applied with the environment temperature above +5ºC.
Wooden surfaces to be painted newly: The knots on the timber should be removed. The surface should be filled with Bianca Vals Primer. By this way, generation of fungus, mold and worms may be avoided. Bianca Vals Lux is applied in two layers with brush, roller or spraying.
Old Painted Wooden Surfaces (synthetic or water based surfaces): The oxidation layer is removed from the surface with a thin sandpaper. Then undercoating with a synthetic antioxidant is applied. Bianca Vals Lux is applied after 6 hours either with brush, roller or spray method. It is recommendable to apply Bianca Vals Primer before the painting.
Metal Surfaces to be painted newly: First of all, oil, rust and all kinds of dirt must be removed from the surfaces. Then synthetic anti-oxidant must be used in order to avoid oxidation. Only after 6 hours Bianca Vals Lux must be applied either with brush, roller or spyaring method
Old painted metal surfaces (synthetic or water based surface): The surface must be freed from oxidation layer by a thin sandpaper. If there is no indication of oxidation, Bianca Vals Lux is applied either with brush, roller or spraying method.