AREAS OF USE
It can be applied on all kinds of wood, furniture, parquet, laminate, ceramic, tile, marble, glass, plastic, metal, aluminum, galvanized, zinc, porcelain, fabric, wall, stone, paper, cardboard.
SPECIFICATIONS
• Hiding power is very high.
• It has excellent water resistance. Since it has very good water resistance, it also provides waterproofing on the applied surface.
• It has high chemical resistance (soap, cleaning detergent, diluted bleach etc.)
• It has high adhesion strength, does not require any primer.
• It is dirt and stain resistant and can be easily cleaned with a wet and soapy cloth.
• Perfumed, does not have an irritating odor.
• It is suitable for use in all indoor and outdoor spaces.
APPLICATION
Stella Wood Appearance Paint Application
Preparation before application: The application surface must be clean. The surface must be free from all factors that will reduce the adhesion of the paint to the surface, such as all dust, dirt, oil. Sub-floor preparation is made on the required pre-prepared surface in 2 coats without diluting Stella Water-Based Pure Acrylic Paint with a silk brush, velvet varnish roller or spraying to obtain a wooden pattern appearance. Wait at least 2 hours between coats.
Application: In order to obtain a wooden appearance on the surface after the preparation of the subfloor with Bianca Stella Pure Acrylic Paint, pour the required amount of Stella Wood Appearance Paint into an empty container and add water at the same rate and mix until it becomes homogeneous. Always apply in one direction and as a single layer, always staying on the same plane with the help of a shortcut brush or sponge.
Stella Metal Appearance Paint Application
The application surface must be clean. The surface should be free of all factors that will reduce the adhesion of the paint to the surface, such as all dust, dirt, oil and silicone, and sanding should be done when necessary. It does not require any primer before application. It is recommended to prime the surface with Bianca Antipas to prevent corrosion on metal surfaces. After opening the package of Bianca Stella Metal Appearance Paint, it is mixed until a homogeneous consistency is obtained. The product is applied to the pre-prepared surface in 2 layers, without thinning, with a silk brush, velvet roller or spraying. Between floors min. You should wait 2 hours.
During the application, care should be taken to ensure that the applied surface and ambient temperature are between +5°C and +30°C.
