Stella – Water Based Pure Acrylic Paint

It is a water-based, pure acrylic-based new generation transformation paint with excellent adhesion to all surfaces.

AREAS OF USE
It can be applied on all kinds of wood, furniture, parquet, laminate, ceramic, tile, marble, glass, plastic, metal, aluminum, galvanized, zinc, porcelain, fabric, wall, stone, paper, cardboard.

 

SPECIFICATIONS
• Hiding power is very high.
• It has excellent water resistance. Since it has very good water resistance, it also provides waterproofing on the applied surface.
• It has high chemical resistance (soap, dishwashing liquid, shampoo, etc.).
• It does not leave any brush or roller marks as it is very spreading, it gives the user the desired time for necessary corrections.
• It does not require an additional varnish application thanks to its bright appearance after application.
• It has high adhesion strength, does not require any primer.
• It is dirt and stain resistant and can be easily cleaned with a wet and soapy cloth.
• Perfumed, does not have an irritating odor.
• Since it is resistant to water and chemicals, it does not require an additional protective varnish application (except for places where contact with water is high and the ground).
• It is suitable for use in all indoor and outdoor spaces.
• It has unlimited color options with the Colorate Coloring System.

 

APPLICATION
The application surface must be absolutely clean. The surface should be free from all factors such as dust, dirt, oil that will reduce the adhesion of the paint to the surface, and sandpaper should be done when necessary. It does not require any primer use before application. If it will be applied on metal surfaces, it is recommended to prime the surface with Bianca Anti-rust in order to prevent corrosion. After opening the Bianca Stella package, it is mixed until a homogeneous consistency is obtained. The product is applied to the necessary pre-prepared surface in 2 layers without diluting with a silk brush, velvet roller or spray. Between floors min. It should be waited for 2 hours. Care should be taken to keep the applied surface and ambient temperature between +5ºC and +30ºC during the application.

Color Chart