AREAS OF USE
It is used with a suitable primer after the preparation of the floor on mineral surfaces such as walls, concrete, drywall, cement board, inside and outside of the buildings.
SPECIFICATION
• Thanks to its high water vapor permeability, it allows the steam to be expelled and the surface to breathe.
• It is water resistant.
• It does not have an irritating odor during application.
• Gives a concrete effect.
APPLICATION
After cleaning all kinds of dirt, oil and dust on the surfaces where Bianca Artistico Betoon will be applied, the surface defects should be corrected with Bianca Interior Putty and primed with 2 coats of Bianca Universal Primer. Bianca Artistico Betoon product is mixed with a low-speed mixer, after the primer is completely dry, the first coat is applied with a trowel or steel trowel to a thickness of at least 1 mm. At least 6 hours after the first layer application, the second layer is applied. If different patterns are desired, the surface is given an effect with a special sponge or comb before the 2nd layer dries completely. Then the surface is glazed with a steel trowel to obtain a smooth finish. Care should be taken to keep the ambient temperature at the lowest + 5 ° C and the highest + 35ºC during the application and for the next 24 hours.
