Cement based, polymer additive, flexible, ceramic, porcelain, granite, marble, natural stone, pressed brick and glass mosaic bonding mortar with white color, slip feature, long working time, easy to prepare and applied.<\/p>\n
<\/p>\n
AREAS OF USE
\n<\/b>\u2022 Indoors and outdoors
\n\u2022 In horizontal and vertical applications
\n\u2022 Ceramic, porcelain, granite, marble, natural stone, pressed bricks and glass mosaics; on cement based surfaces exposed to temperature differences and on gypsum panel sheets and gypsum plaster surfaces (after primer application)
\n\u2022 Swimming pool, water storage, bathhouse, bath, etc. In wet areas, on heated floors, in heated pools, in swimming pools where water is not drained in winter,
\n\u2022 In the walls and upholstery of cold weather stores,
\n\u2022 It is used for ceramic and granite bonding works on exterior facades of buildings, for repairing and repairing, for bonding ceramic on ceramic.<\/p>\n
<\/p>\n
ADVANTAGE
\n<\/b>\u2022 Mix with water only,
\n\u2022 Easy to prepare and apply.
\n\u2022 The processing time is long,
\n\u2022 Does not slip in vertical applications,
\n\u2022 It is resistant to the freeze-thaw cycle.
\n\u2022 Resistant to stresses and vibrations caused by temperature differences,
\n\u2022 Provides excellent adhesion.<\/p>\n
<\/p>\n
APPLICATION<\/strong> High Performance, Flexible, Ceramic, Porcelain and Granite Bonding Filler<\/strong><\/p>\n
\nTo obtain a better adhesion surface; prepared mixture of Bia-Fix Super Flex Adhesive (White)<\/strong><\/em> is spread with equal thickness to the surface with the flat part of the malt and then must be carded with a selected trowel suitable for the size of the tile or marble. Ensure that the adhesive mortar touches the entire backside of the ceramic and marbles. Depending on the ceramics-marble used and floor smoothness, if necessary, double-side bonding method is preferred; as well as to the surface must be driven with mortar and ceramic and marbles should be detected so that the carding direction is perpendicular to each other. This is especially necessary in outdoor environments and in climates where hot and cold temperature changes are severe. This process will ensure that the entire adhesion area of \u200b\u200bthe material to be bonded is covered with mortar. It should be adhesives on the chiseling mortar within 30 minutes with the aid of rubber hammer to ensure good adhesion.<\/p>\n","protected":false},"excerpt":{"rendered":"